Family-owned · Licensed & insured · Colorado EC.0101339 Call 719-659-4715
CELTICELECTRIC Book a Free Walkthrough
COLORADO SPRINGS · NORTH · CENTRAL · EAST

Colorado Springs electricians who master one trade.

From century-old homes near downtown and Old Colorado City to new builds in Flying Horse and Briargate, Celtic Electric handles panel upgrades, smart panels, generators, EV chargers and custom lighting across the Springs.

Like a Celtic knot, every connection matters

  • 5.0 on Google · 120+ reviews
  • Licensed & insured
  • Permits handled
SERVICE AREA PANEL
Colorado Springs
ZIP CODES · ALL ON OUR ROUTE
80903
80904
80905
80907
80909
80910
80915
80916
80917
+13 more ZIPs
80918
80919
80920
80921
80922
80923
80924
80925
80927
80929
80938
80939
80951
NEIGHBORHOODS · LIT WHERE WE'VE WORKED
Flying HorseBriargateNorthgateGleneagleRockrimmonMountain ShadowsKissing CamelsPleasant ValleyOld Colorado CityPatty JewettDowntownStetson HillsCorderaWolf RanchBanning Lewis Ranch
Not your neighborhood? Check your ZIP →
ELECTRICIAN IN COLORADO SPRINGS

What we do most in Colorado Springs

Colorado Springs is our home base. These are the jobs homeowners here call us for most.

Panel Upgrades
Older homes near downtown, the Old North End and Pleasant Valley often still run small or original panels. We look at the whole system, not just the box.
Learn more →
Smart Panels
Smart panels for Flying Horse, Briargate and Wolf Ranch homes adding EVs, solar or batteries. See and control every circuit.
Learn more →
EV Chargers
Level 2 chargers in the garage or driveway, sized to your panel after a load check.
Learn more →
Custom Lighting
Recessed lighting, dimming scenes and keypads for kitchens, basements and great rooms.
Learn more →
Surge Protection
Summer lightning along the Front Range is hard on electronics. Whole-home protection at the panel.
Learn more →
Backup Generators
Backup power for outages from wind, wet snow and summer storms.
Learn more →
OUR WORK HERE

Photos and reviews from Colorado Springs

Neighborhoods we serve

Flying Horse, Briargate, Northgate, Gleneagle, Rockrimmon, Mountain Shadows, Kissing Camels, Pleasant Valley, Old Colorado City, Patty Jewett, Downtown, Stetson Hills, Cordera, Wolf Ranch, Banning Lewis Ranch and more.

ZIP codes: 80903 80904 80905 80907 80909 80910 80915 80916 80917 80918 80919 80920 80921 80922 80923 80924 80925 80927 80929 80938 80939 80951

Linear crystal chandelier over a dining table in a Colorado Springs home
Linear crystal chandelier, Colorado Springs dining roomDesign: Allure Design Lab · Remodel: Springs Home Improvement
Rattan pendants over a kitchen island in front of a backlit stone backsplash in Colorado Springs
Rattan pendants and backlit stone, Colorado SpringsDesign: Allure Design Lab · Remodel: Springs Home Improvement
★★★★★

5.0 on Google · 120+ reviews

Homeowners across Colorado Springs trust us with panels, lighting and repairs.

Read our reviews →
HOUSING STOCK

Colorado Springs homes, era by era

Colorado Springs was built in waves, and the wiring often tells you which decade your home is from. Knowing the era tells us where to look first.

Late 1800s to 1940s
Downtown, the Old North End, Patty Jewett and Old Colorado City. Some homes still have knob and tube wiring, two-prong outlets or a mix of old and new circuits added over the years.
1950s to 1960s
Postwar ranches in Pleasant Valley and the neighborhoods off Academy Boulevard. Small panels, few kitchen circuits and ungrounded outlets are common.
1970s to 1990s
Rockrimmon, Mountain Shadows, Kissing Camels and early Briargate. Original panels are now 30 years old or more, often full, and some are brands with known problems.
2000s to today
Flying Horse, Cordera, Wolf Ranch, Northgate and Banning Lewis Ranch. Solid wiring, but builder panels fill up fast once you add an EV, hot tub or finished basement.

Whatever the era, the walkthrough is the same. An electrician looks at the panel, the service and how your family actually uses the house, then writes up clear written options, ordered Best to Good.

FRONT RANGE WEATHER

Storms, lightning and power in Colorado Springs

The Springs gets summer lightning, hail, strong mountain winds and heavy, wet spring snow. Each one is hard on a home electrical system in its own way.

Lightning and utility switching send surges down the lines. A whole-home surge protector at the panel is the first line of defense, backed by plug-in protection for TVs and computers. See our surge protection page for how the layers work together.

Wind and snow bring down lines and limbs. A standby generator, or a generator inlet with a proper interlock, keeps the furnace, fridge and sump pump running. Our backup generator page explains the options.

Lights that dim when the furnace starts, or breakers that trip in storms, are worth a look. Our diagnostic help page walks through the common signs safely, without opening the panel.

PERMITS AND INSPECTIONS

Electrical permits in Colorado Springs

Most electrical work beyond a simple device swap needs a permit in Colorado Springs, including panel upgrades, new circuits, generators and EV chargers. Permits in the city and the rest of El Paso County go through the Pikes Peak Regional Building Department.

You do not have to figure any of that out. We pull the permit, schedule the inspection and coordinate with your utility on any disconnect and reconnect. You just let the inspector in.

NEARBY AREAS

Electricians near Colorado Springs

Same crew, same standards, a short drive away. See every ZIP code we cover on the service areas map.

Electrician in Monument and Woodmoor
Generators and panel upgrades on the Palmer Divide.
Open the page →
Electrician in Black Forest
Backup power for wells, shops and wooded acreage.
Open the page →
Electrician in Broadmoor and Cheyenne Mountain
Custom lighting and careful work in finished homes.
Open the page →
Electrician in Fountain and Security-Widefield
Panel upgrades and inspection repairs south of the Springs.
Open the page →
FAQ

Colorado Springs electrician questions

Do you serve all of Colorado Springs?+

Yes. From Flying Horse and Briargate in the north to Broadmoor in the southwest and Banning Lewis Ranch in the east, the whole city is on our regular route. The walkthrough and your written options are free.

Who pulls the permit in Colorado Springs?+

We do. We pull the electrical permit with the regional building department, schedule the inspection and coordinate any utility disconnect. You just let the inspector in.

My house is from the 1950s. Is the wiring safe?+

Many older Springs homes have original wiring, small panels or ungrounded outlets. We look at the system as a whole and tell you honestly what it needs now and what can wait.

Do I need a panel upgrade for an EV charger?+

Not always. We run a load check first. If your panel has room, we install the charger without an upgrade. If not, we show you the options, including smart panels and load management.

Can you put a smart panel in my newer north-side home?+

Yes. Smart panels let you see and control each circuit from your phone and pair well with EV charging, solar and batteries. If a standard upgrade makes more sense, we will say so.

Do you work in older homes near downtown and Old Colorado City?+

Yes. Older homes take more care: plaster walls, tight attics and wiring from different decades. We plan the work to keep wall openings to a minimum and explain everything before we start.

Can you help with a home inspection repair list?+

Yes. Buyers and sellers in the Springs often get electrical items flagged, like double-tapped breakers, missing GFCI protection or an older panel. We sort out what is urgent and handle the fixes.

Colorado Springs's electrician, one trade mastered.

A licensed electrician comes out and gives you clear written options.

Book a Free Walkthrough 719-659-4715