SPAN Smart Panel Installation in Colorado Springs
See and control every circuit from your phone, with a panel that works with generators, batteries and EV chargers.
Like a Celtic knot, every connection matters
- 5.0 on Google · 120+ reviews
- Licensed & insured
- We install SPAN smart panels
- Permit and inspection handled
- ✓See every circuit from your phone
- ✓Turn circuits on and off from the app
- ✓Works with generators, batteries and EV chargers
- ✓Takes the place of your main panel
See SPAN in your Colorado Springs home
Tell us what your home has and what you plan to add. The phone shows how a SPAN smart panel could handle it: circuit by circuit, while the EV charges, and during an outage.
Amps shown are typical ranges from SPAN's Electrification Checklist. Your home's real numbers come from a load check. Not sure of your panel size? That's fine. We check it at the walkthrough, so there's no need to open your panel.
You're planning a heat pump and an EV charger. You already have an induction range. SPAN can manage those loads so you may avoid a costly service upgrade. Ask us if you qualify. Not sure of your panel size? We check it at the walkthrough.
Avoiding a utility service upgrade requires qualification and enrollment in SPAN PowerUp.
Every circuit shows up by name, and you can switch it on or off from the app, at home or away.
This demo is our own illustration of what SPAN can do. It is not the SPAN app, and the real app looks different. SPAN is a trademark of SPAN.IO, Inc.
Want to know if SPAN can handle your plans?
An electrician checks your panel, your service and your plans, then gives you options in writing. If a standard upgrade fits better, we will tell you.
SPAN smart panel options in Colorado Springs
We install SPAN smart panels. After a free walkthrough, an electrician gives you written options to choose from. No pressure, no surprises.
SPAN + EV and Backup Ready
A SPAN smart panel planned around what you will add next, with a Level 2 EV charger and room for backup power.
- SPAN smart panel
- Level 2 EV charger installed
- Planned for a generator or battery
- Powerworx whole-home surge protection
SPAN + Powerworx
A SPAN smart panel with a step up in surge protection for the electronics and appliances you care about.
- SPAN smart panel
- Powerworx e3 surge protection
- Every circuit named in the app
SPAN Smart Panel
A SPAN smart panel in place of your existing panel, installed to code.
- SPAN smart panel
- Code-required surge protection
- Permit, inspection and utility coordination
A clean, modern panel that replaces your old one
SPAN's MAIN models carry a 200A main breaker. Every model has a 225A busbar and is rated for indoor or outdoor installs (NEMA 3R). We help you pick the model that fits your home and your plans.
What a SPAN smart panel does
A SPAN smart panel takes the place of your main electrical panel. It does the same safety job as any panel, and it lets you see and control each circuit from an app.
Every circuit, on your phone
See which circuits are running and how much power each one is using right now.
Control from anywhere
Turn circuits on and off from the app, at home or away.
Built for what comes next
SPAN works with generators, batteries and EV chargers, so the panel is ready as your home grows.
Who a smart panel is for
SPAN is a great fit for some homes, and a standard panel is the right call for others. We tell you which in writing.
Adding an EV, generator or battery
Homes planning big additions get the most from a panel built to work with them.
Homeowners who want to see their power
If you want to know what is running and when, the app shows you circuit by circuit.
Remodels and new builds
A remodel or a full panel replacement is the natural time to go smart.
Homes across the Springs
From Flying Horse and Briargate to Broadmoor, Monument and Black Forest.
SPAN with generators, batteries and EV chargers
Backup power
Pick which circuits stay on in an outage and change priorities anytime. See backup generators
EV charging
SPAN can slow or pause charging while big loads run. We confirm it with a load check. See EV chargers
Surge protection
Code-required surge protection comes standard, with Powerworx as a step up. See surge protection
What SPAN install day looks like
A SPAN install is a full panel replacement, so it follows the same steps as our panel upgrades. We handle the permit, the utility and the scheduling.
- 01
Free walkthrough
An electrician looks at your panel and what you want to add.
- 02
Options and booking
Your options in writing. You pick, and we book it.
- 03
Colorado 811 locates
Colorado 811 marks underground utilities in paint before install day.
- 04
Install day
Your power is off while our crew swaps in the SPAN panel.
- 05
App setup
We connect the panel and walk you through the app.
- 06
Inspection
You let the inspector in. We handle the coordination.
SPAN smart panels installed by a licensed electrician
★★★★★ 5.0 on Google · 120+ reviews. The electrician who quotes your job is the one who plans it.
5.0 on Google · 120+ reviews
Homeowners trust us to plan and install their panels the right way, with a permit and a clean finish.
Read our reviews →SPAN smart panel vs a standard panel upgrade
Both are new, code-compliant panels installed with a permit. The difference is what you can see and control.
SPAN smart panel
Everything a new panel does, plus circuit-by-circuit monitoring and control from your phone, and a panel that works with generators, batteries and EV chargers.
Standard panel upgrade
A safe, right-sized panel with room to grow. If you mainly need capacity and safety, it may be the better fit. See panel upgrades
SPAN panel permits in El Paso County and nearby
Permits, in plain words
A SPAN smart panel is a panel replacement, so it needs a permit and an inspection. We pull the permit with whichever office covers the job, whether that's the Pikes Peak Regional Building Department, Douglas County, Teller County or the State of Colorado, and schedule the inspection. Someone just needs to be home to let the inspector in.
Licensed and insured
Celtic Electric is a family-owned, licensed and insured Colorado electrical contractor, EC.0101339.
SPAN smart panels near you
Goes great together
SPAN works hand in hand with these services, and we can plan them together on one walkthrough.
Backup Generator
Pair SPAN with a generator and pick which circuits stay on in an outage, then change priorities anytime.
See Backup Generators →Powerworx Surge Protection
Code-required surge protection comes standard, and Powerworx steps it up to guard your smart panel and the equipment behind it.
See Surge Protection →EV Chargers
SPAN can slow or pause charging while big loads run, which helps a home make room for an EV.
See EV Chargers →SPAN smart panel questions
Don't see yours? Call 719-659-4715 and talk to someone who actually knows electrical.
What is a SPAN smart panel?+
A SPAN panel takes the place of your main electrical panel and lets you see and control every circuit from your phone. It works with generators, batteries and EV chargers.
How much does a SPAN panel cost in Colorado Springs?+
It depends on your home, your current panel and what you want it ready for. After a free walkthrough you get written options, so you know the exact price before any work starts.
Does SPAN replace my existing panel?+
Yes. SPAN is a full replacement for your main panel, so the install follows the same steps as a panel upgrade.
Will SPAN work with a generator or battery?+
Yes. SPAN works with generators and batteries. We plan the backup setup with you so the circuits you care about most are covered.
Can SPAN help with an EV charger?+
Yes. SPAN can manage an EV charger alongside the rest of your home, which helps when your service is tight. We confirm what your home needs with a load check.
Can SPAN help me avoid a service upgrade?+
Sometimes. SPAN PowerUp balances your home's electricity use to stay within its service limit, which can let you add an EV charger, heat pump or induction range without a utility service upgrade. That requires qualification and enrollment in SPAN PowerUp, so we check your home first.
Do I need a permit for a SPAN panel?+
Yes. We pull the permit with whichever office covers the job, whether that's the Pikes Peak Regional Building Department, Douglas County, Teller County or the State of Colorado, and schedule the inspection.
Will a smart panel lower my electric bill?+
A SPAN panel is about seeing and controlling your power. It is not sold as an energy-saving product, and we do not promise lower bills.
Is SPAN right for every home?+
Not always. If a standard panel upgrade fits your home and plans better, we will say so and show you both options in writing.
See every circuit.
Book a free walkthrough and an electrician will tell you if a SPAN smart panel is the right fit for your home.